Grizzly Router Table Extension
The best way to take your wood routing work toward the next level is a router table extension. You need a Grizzly router table extension if you want to handle even the most intricate router jobs.
This extension transforms your Grizzly router table into a router table that can cut circles up to 58 inches in diameter. With this router table extension, you’ll be able to do woodworking jobs on a larger scale than ever before, and your work will show it.
With this extension, you can easily make circles with a diameter of up to 58 inches. That’s big enough for even the most complex projects! It’s also easy to use: attach it to your current Grizzly router table and start cutting.
The extension is made from aluminum and comes with installation instructions. It is easy to install and set up, and you can start enjoying the benefits in no time.
We have also reviewed the Best Grizzly Router Tables, so check them out as well.
The best way to extend your grizzly router table
A router table extension is a great way to get more out of your workshop and increase the versatility of your grizzly router table. It attaches to the side of your table and provides you with a work area that can accommodate much larger pieces.
If you’re looking for a way to take your woodworking to the next level, you need to check out the Grizzly router table extension. It’s a great addition to any shop, and it will help you tackle even the most challenging projects.
There are several popular models available, including the Kreg PRS1025 Precision Router Table Setup Bars and the Incra Rack & Pinion Fence. Both are easy to attach and use, with smooth sliding action and various stop positions for precision control over every cut you make.
They’re also designed to be easy to store when not in use so that you don’t have to worry about them taking up precious space in your workshop. The easiest way, though, is simply adding one that’s already built into your grizzly router table!
Read this detailed guide Which Routers Work with the grizzly Router Table?
How do you extend a router table?
Many routers can be fitted with a table, but if those tables are too small for your woodworking work, you can easily extend the size of your router table.
You need to make sure that the router table fence is level, that the fence height is adjusted correctly, and that they’re parallel to the miter slot.
A large extension will mean you’ll have plenty of room for even your most ambitious projects when these factors are in place!
To adjust the router table fence:
- Begin by locking all four locking knobs before loosening them until they no longer bind against the surface of the rails on top.
- After relaxed, each knob about 1/4 turn, loosen each rail screw about 1/4 turn and move it along its track until it’s within about 1/8″ of where it needs to be (this will help you avoid overshooting and having to start again from scratch).
- Repeat steps 1 and 2 with each knob and rail screw until they’re fully loosened. To check progress, look at whether any part of your workspace has been revealed through a gap between any two rails yet—if not, keep loosening knobs or adjusting screws until you see some space between them.
- Allow enough room for an extension board to fit between each pair of rails (we recommend allowing 5⁄16″ clearance per board). If there is currently a board on the other side, make sure there’s still room for another one—and then add two more boards!
Conclusion
Congratulations! You now know the four types of router tables and will be able to identify them when you see one.
You understand how they work, what they’re supposed to do, and how they make your life easier. Not only that, you are now better equipped to appreciate their finer points of craftsmanship.
