how to mount a router to a table saw?

Routers are one of the most versatile tools in a woodworker’s arsenal, and mounting one to a table saw opens up a world of possibilities. However, it was necessary to be familiar with how to mount a router on a table saw.

How to mount a router to a table saw?

You can mount a router to a table saw to make it easier to use. First, you need to choose the right router and the right bit. Then, you need to prep the router by removing any sharp edges and making it lubricated. Finally, you can mount the router to the table saw.

In this blog post, we will discuss all details required to attach the router to a table saw, so keep reading to learn helpful information.

See Also: Best Router For Router Table

how to mount a router to a table saw

Tools and Materials

If you’re looking to increase the versatility of your table saw, one modification you can make is to add a router to the mix.

This will allow you to do things like cut dadoes and rabbets and make more intricate cuts. You’ll need to purchase or build a router table that attaches to your table saw. You can find plans for these online or in woodworking magazines.

Once you have your router table, you’ll need to choose the right bit for the job. There are many different types of router bits available, so selecting one that is appropriate for the material you’re working with and the type of cut you want to make is essential.

You’ll also need to gather a few other supplies before getting started, including clamps, a straightedge guide, and some form of dust collection. With these things in place, you’re ready to start mounting your router to the table saw.

Step-by-step Instructions

Step 1: you’ll need to gather a few supplies. You’ll need a router, a router table, and some clamps. You may also want to use a drill bit slightly smaller than the router’s baseplate to create pilot holes for the screws.

Step 2: Once you have all your supplies, it’s time to start. Begin by attaching the router table to the side of the table saw. Make sure that it’s level and secure before proceeding.

Step 3: Place your router upside down on the table saw. Center it so that the bit is in line with the blade. Once it’s in position, use the clamps to secure it.

Step 4: Take your drill bit and create two pilot holes in the router’s baseplate. These holes should be placed directly over the outside edges of the table saw’s blade.

Step 5: Use screws to attach the router to the table saw. Be sure to use long enough screws to go through the baseplate and the table saw itself. With everything secured in place, you’re now ready to start using your new setup!

Tips and Tricks

If you’re looking for a way to mount your router to your table saw, there are a few things you can do. First, you’ll need to determine the size and shape of your router. Then, you’ll need to find a way to attach it to the table saw.

One option is to use a mounting plate. In most hardware stores, you can find these. Make sure that your chosen one is compatible with your particular router model.

Another option is to make your mounting plate using plywood or MDF. If you go this route, be sure that the screws you use are long enough to reach into the table saw’s tabletop.

Once your router is mounted, you’ll need to connect it to a power source. Most routers come with an AC adapter that plugs into a standard outlet.

However, you can always use an extension cord if yours doesn’t have one. Just be sure that it’s rated for outdoor use if you’re going to use it in an outdoor workshop.

Now that your router is mounted and connected to power, you’re ready to start using it! If you’re unsure how to get started, check out our other blog post on how to use a router for beginners.


In conclusion, You can connect your router with a table saw, but you need to learn the proper way to connect its appropriate way.

Similar Posts