How to Setup Hitachi Table Saw?

A table saw is one of the most versatile tools in a woodworking shop. It can make long, accurate rip, cross, and miter cuts. But the proper setup of a table saw is essential to work with accuracy and user safety.

How to Setup Hitachi Table Saw?

If you own a Hitachi table saw, there are a few things you will need to do to get started. The first is to ensure that the saw is properly plugged in and has enough extension cords to reach all the ports.

This post will show you how to set up your Hitachi table saw so you can start immediately. Keep reading to get more information.

See Also: Top Table Saw For Beginners

What You Will Need To Setup Hitachi Table Saw?

If you want to add a Hitachi table saw to your workshop, you’ll need a few things to start. Here’s a quick list of what you’ll need to set up your new Hitachi Table Saw:

  • A level surface: You will need a level surface to set up your Hitachi table saw. This can be a countertop, table, or floor. If you are using a countertop, ensure it is level before you begin. 
  • An outlet: You will need an outlet to plug in your Hitachi table saw. 
  • A saw stand: A saw stand is not required, but it will make your life much easier. A saw stand will allow you to adjust the height of your saw and keep it level. 
  • A saw blade: You must purchase a blade compatible with your Hitachi table saw. 
  • A rip fence: A rip fence is not required, but it is an excellent addition. A rip fence will help you make straight cuts.
  • A miter gauge: A miter gauge is not required, but it is a nice addition. A miter gauge will help you make angled cuts.

Steps to Setup Hitachi Table Saw

Here is the step-by-step method to set up the table saw. You can follow the given below steps to set up your table saw:

  1. Setting Up the Table Saw
  2. Adjusting the Blade
  3. Making a Cut
  4. Finishing Up

1. Setting Up the Table Saw

If you’re new to woodworking, the table saw can be a daunting tool. But with some know-how, you’ll be able to set up your Hitachi table saw quickly and easily. Here’s what you need to do:

  1. Unpack the saw and stand it up on its side. Attach the legs to the stand and assemble it.
  2. Next, align the blade with the miter gauge slot. You’ll want to ensure that the blade is perpendicular to the slot.
  3. Once the blade is aligned, tighten the arbor nut to secure it.
  4. Now, it’s time to connect the power cord to the saw and plug it in. Ensure the switch is in the “off” position before doing this!
  5. Finally, raise the blade to its highest position and adjust the fence to be parallel to the blade. You’re ready to start cutting once everything is in place!

2. Adjusting the Blade

If you’re setting up a Hitachi table saw for the first time, one of the most important things to do is adjust the blade. Your cuts will be clean and precise if you do this. Here’s how to do it:

  1. First, loosen the blade clamping screws and tilt the blade to align it with the miter slot.
  2. Next, use a wrench to rotate the blade so that the teeth point downward. Then, tighten the arbor nut to secure the blade in place.
  3. Finally, use the adjustment knob to raise or lower the blade until it’s at the desired height. Once you’ve done this, tighten the blade clamping screws, and you’re ready to start cutting!

3. Making a Cut

Making a precise, clean cut is essential no matter what project you’re working on. That’s why having a great table saw is so essential.

Investing in a Hitachi table saw is a smart move if you’re looking to get started with woodworking or just upgrade your current tools.

First, you’ll need to level the table saw. This can be done by adjusting the legs until the table is level with the ground. Next, you’ll need to align the blade with the miter gauge.

You can do this by loosening the blade guard and moving the blade into position. Once the blade is aligned, you can tighten the blade guard back into place.

Now it’s time to start making some cuts! To do this, you’ll need to adjust the fence to align with the blade. Once the fence is in place, you can make rip cuts or cross cuts by pushing the wood through the blade. Just be sure to use proper safety precautions when operating the table saw.

4. Finishing Up

After you have your Hitachi table saw set up, there are a few final steps to ensure it is ready for use. First, check to ensure the blade is installed correctly and the teeth are facing the right direction.

Ensure that your fence is parallel to your blade by adjusting it next. Finally, test the saw by making a few cuts on scrap wood before using it on your project.

By following these simple steps, you can be sure that your Hitachi table saw will provide years of reliable service.

Tips and Tricks

If you’re looking for tips and tricks to set up your Hitachi table saw, you’ve come to the right place. This blog section will share some of our top tips to help you get the most out of your table saw.

One of the most important things to remember when setting up your table saw is to ensure the blade is aligned correctly.

This can be tricky, but it’s essential to ensure that your cuts are precise and accurate. If you’re not confident in your ability to align the blade, we recommend taking your table saw to a professional for assistance.

Another essential tip is always using a push stick when making rip cuts. This will help prevent your hands from getting too close to the blade, which can be dangerous.

Always be sure to keep your fingers well away from the path of the blade when operating the table saw.

Finally, take care when changing out blades on your table saw. Always unplug the saw before starting any work on the blade.

Be sure to use the proper size wrench when loosening or tightening the blade bolts, and never try to force a blade change if it seems to be stuck.

How Do You Attach a Hitachi Table Saw to Stand?

The Hitachi table saw is a good option if you’re looking for a table saw that can handle heavy-duty jobs. But before you can start using it, you need to attach it to a stand. Here’s how you can do that:

  1. Start by attaching the two side brackets to the stand. The brackets should be level with one another.
  2. Next, take the Hitachi table saw and place it on the brackets. Once it’s in position, use the bolts with the saw to secure it.
  3. Finally, use the provided wrench to tighten all the bolts. Once everything is tight, you’re ready to start using your Hitachi table saw.


In conclusion, A table saw is a very versatile tool, but it is not easy to use. It requires proper setup to work safely. To set up a Hitachi table saw, you’ll need the right accessories, and your saw must be assembled correctly.

Read Also: How to Remove Riving Knife on Hitachi Table Saw?