How to Remove Riving Knife on Dewalt Table Saw?

Riving knives are an essential safety feature on table saws, but you may need to remove yours at some point. To remove a riving knife, you must have the proper knowledge.

How to Remove Riving Knife on Dewalt Table Saw?

To remove the riving knife on a Dewalt table saw, ensure the blade is locked in the up position. Next, remove the six screws that hold the riving knife in place. Once the screws are removed, carefully lift the riving knife off the blade. 

We will discuss removing riving knives in detail in this blog post. You need to know how to do it if you plan on using a table saw, so continue reading.

See Also: How to Unlock a Dewalt Table Saw?

Guide For Removing Riving Knife

Removing riving knife isn’t much easy you must learn how to remove it safely. The given below detail will help you to remove riving knife in a Dewalt Table Saw.

  • Tools and Materials Needed
  • Step-by-Step Instructions
  • Tips and Tricks

Tools and Materials Needed

Assuming you have a Dewalt table saw, you will need the following tools and materials to remove the riving knife: 

  • T-30 Torx driver 
  • #2 Phillips screwdriver 
  • 5/16″ hex wrench 
  • 1/4″ hex wrench

First, unplug the table saw from its power source. Then, use the T-30 Torx driver to remove the two screws holding the throat plate. Next, use the #2 Phillips screwdriver to remove the two screws holding the riving knife.

Finally, use the 5/16″ hex wrench to loosen and remove the riving knife. The 1/4″ hex wrench is used to adjust the tension on the blade.

Step-by-Step Instructions

If you’re looking to remove the riving knife from your Dewalt table saw, follow these steps:

  1. Unplug the saw from its power source and remove any guards or other attachments.
  2. Locate the two retaining bolts that hold the riving knife in place. These are typically located near the back of the table saw.
  3. Use a wrench or socket to loosen and remove the retaining bolts.
  4. Carefully remove the riving knife from the saw, careful not to damage any surrounding components.
  5. Once the riving knife is removed, you can either clean it and reinstall it or replace it with a new one.

Tips and Tricks

If you’re looking to remove the riving knife from your Dewalt table saw, there are a few things you’ll need to keep in mind.

First, ensure the saw is unplugged, and the blade is not spinning. Next, locate the two bolts that hold the riving knife in place. These are typically located near the back of the saw.

Using a wrench or socket, loosen and remove the two bolts. Be careful not to drop them, as they can be difficult to replace. With the bolts removed, you should now be able to gently pull the riving knife away from the saw.

There are a few different reasons why you might want to remove the riving knife from your Dewalt table saw.

Perhaps you’re changing blades and need access to the arbor nut, or maybe you’re doing some fancy cuts that require the removal of the knife. Regardless, it’s a pretty straightforward process that anyone can do with little know-how.

Why do people remove the riving knife on Dewalt table saw?

There are a few reasons why people might want to remove the riving knife from their Dewalt table saw. The first reason is that it can make cross-cutting and dadoing operations easier.

When the riving knife is removed, the blade can be raised higher above the table, making it easier to cut through thick pieces of wood. Removing the riving knife can also help prevent kickback when cutting dadoes or rabbets. 

Another reason someone might remove the riving knife is if they use their table saw for operations that don’t require it, such as shaping or planning.

In these cases, having the extra blade guard in place can get in the way and be more of a nuisance than anything else. 

Ultimately, whether or not to remove the riving knife is a personal decision and will depend on what kind of work you’ll be doing with your table saw.

Is a riving knife necessary for Dewalt table saw?

If you’re wondering whether or not you need a riving knife for your Dewalt table saw, the answer is maybe. It depends on what you’re using your saw for.

If you’re only going to be making simple cuts, then you probably don’t need one. However, a riving knife is a good idea if you’re planning on doing any intricate work or cutting thick materials.

There are a few advantages to using a riving knife:

  1. It helps to prevent kickback by keeping the material from binding on the blade.
  2. It can help make precise cuts by giving you better control over the material.
  3. It helps to protect the blade from damage by preventing excessive wear and tear.

If you do decide that you need a riving knife for your Dewalt table saw, then removing the old one is easy enough.

Use a wrench to loosen the two bolts that hold it in place, then slide it off. Installing the new one is just as easy – slide it into place and tighten the bolts. That’s all there is to it!



Conclusion

In short, The riving knife is a safety feature on a table saw. To remove it, you must first lock the blade in the up position.

There are many advantages to removing the riving knife. Hopefully, now you clearly understand how to remove riving knife on Dewalt table saw.

Similar Posts