How to Remove Riving Knife on Milwaukee Table Saw?

Before beginning any work with the table saw, you must remove the riving knife. The riving knife is the safety device that is attached to the blade. However, Knowing how to remove a riving knife from a Milwaukee table saw is crucial to its proper removal.

How to Remove Riving Knife on Milwaukee Table Saw?

Removing a riving knife on a Milwaukee Table Saw can be a tricky process. One approach is to remove the blade guard and use a standard screwdriver to pry it off the blade. If this fails, you can use a special tool to remove the blade.

In this blog post, we’ll walk you through the steps necessary to safely and effectively remove the riving knife from your Milwaukee table saw.

See Also: How to Unlock a Milwaukee Table Saw?

milwaukee table saw riving knife Removing Guide

Removing Milwaukee riving knife isn’t much easy you must learn how to remove it safely. The given below detail will help you to remove riving knife in a table saw.

• Tools and Materials Needed
• Step-by-Step Instructions
• Tips and Tricks

Tools and Materials Needed

Assuming you have a Milwaukee table saw, you will need the following tools and materials to remove the riving knife: 

• T-30 Torx driver 
• #2 Phillips screwdriver 
• 5/16″ hex wrench 
• 1/4″ hex wrench

First, unplug the table saw from its power source. Then, use the T-30 Torx driver to remove the two screws holding the throat plate. Next, use the #2 Phillips screwdriver to remove the two screws holding the riving knife.

Finally, use the 5/16″ hex wrench to loosen and remove the riving knife. The 1/4″ hex wrench is used to adjust the tension on the blade.

Step-by-Step Instructions

If you’re looking to remove the riving knife from your Milwaukee table saw, follow these steps:

1. Unplug the saw from its power source and remove any guards or other attachments.
2. Locate the two retaining bolts that hold the riving knife in place. These are typically located near the back of the table saw.
3. Use a wrench or socket to loosen and remove the retaining bolts.
4. Carefully remove the riving knife from the saw, careful not to damage any surrounding components.
5. Once the riving knife is removed, you can either clean it and reinstall it or replace it with a new one.

Tips and Tricks

If you’re looking to remove the riving knife from your Milwaukee table saw, there are a few things you’ll need to keep in mind.

First, ensure the saw is unplugged, and the blade is not spinning. Next, locate the two bolts that hold the riving knife in place. These are typically located near the back of the saw.

Using a wrench or socket, loosen and remove the two bolts. Be careful not to drop them, as they can be difficult to replace. With the bolts removed, you should now be able to gently pull the riving knife away from the saw.

There are a few different reasons why you might want to remove the riving knife from your Milwaukee table saw.

Perhaps you’re changing blades and need access to the arbor nut, or maybe you’re doing some fancy cuts that require the removal of the knife. Regardless, it’s a pretty straightforward process that anyone can do with little know-how.

Why do people remove the riving knife on Milwaukee table saw?

There are a few reasons why people might want to remove the riving knife from their Milwaukee table saw. The first reason is that it can make cross-cutting and dadoing operations easier.

When the riving knife is removed, the blade can be raised higher above the table, making it easier to cut through thick pieces of wood. Removing the riving knife can also help prevent kickback when cutting dadoes or rabbets. 

Another reason someone might remove the riving knife is if they use their table saw for operations that don’t require it, such as shaping or planning.

In these cases, having the extra blade guard in place can get in the way and be more of a nuisance than anything else. 

Ultimately, whether or not to remove the riving knife is a personal decision and will depend on what kind of work you’ll be doing with your table saw.

Is a riving knife necessary for Milwaukee table saw?

If you’re wondering whether or not you need a riving knife for your Milwaukee table saw, the answer is maybe. It depends on what you’re using your saw for.

If you’re only going to be making simple cuts, then you probably don’t need one. However, a riving knife is a good idea if you’re planning on doing any intricate work or cutting thick materials.

There are a few advantages to using a riving knife:

1. It helps to prevent kickback by keeping the material from binding on the blade.
2. It can help make precise cuts by giving you better control over the material.
3. It helps to protect the blade from damage by preventing excessive wear and tear.

If you do decide that you need a riving knife for your Milwaukee table saw, then removing the old one is easy enough.

Use a wrench to loosen the two bolts that hold it in place, then slide it off. Installing the new one is just as easy – slide it into place and tighten the bolts. That’s all there is to it!

Conclusion

In short, The riving knife needs to be removed before you can start working with the table saw. You can remove the blade guard, you can use a standard screwdriver. If this doesn’t work, you can use a special tool to remove the blade.